Bulent, I used AN-10 hose and fittings.  I have mm/An adapters screwed into
the block for oil exit and entrance and then built my own hose using the
external stainless steel line.  I use it for gasoline, oil and coolant but
will admit that it just bit overkill for the coolant and would go with
something different if doing it again such as top quality radiator hose.

Never a leak (so far)

Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Bulent Aliev" <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, July 15, 2004 5:01 PM
Subject: [FlyRotary] Oil hose size


> Guys and Girls,
> What size and type hose is recommended for the oil system. I salvaged all
> the original fittings, so I have to make new hoses with the old banjo
> fittings.
> I'm not crazy about the external stainless braid. Internal braid is more
> useful I think? And I'm installing fire sleeve all the oil hoses.
> Bulent
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html