Thanks for the response, Al....I found another AV-10 user who is using the
Westach sender from Aircraft Spruce with good results, so I ordered up one
of those.  Thanks for taking the time to reply.  Paul Conner

----- Original Message -----
From: "Al Gietzen" <ALVentures@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, June 27, 2004 11:24 PM
Subject: [FlyRotary] Re: Oil temp sensor


Subject: [FlyRotary] Oil temp sensor

Hi, fellow rotary enthusiasts....I am trying to find out if anyone has
located, or is using, an oil temp sensor that is a male pipe plug thread,
ie....1/4 NPT or 3/8 NPT.  That would be the simplest installation for me.
Any and all suggestions and/or sources would be much appreciated.  I have
run my engine for approximate 10 minute intervals, and the water temp has
been fine, but don't know about oil temp yet, as I need this sensor.  Thanks
in advance for all replies.  Paul Conner, 13b powered SQ2000 canard


Paul;

How about using a readily available M-F reducer, and a VDO 1/8 npt 0-300F
sender?

Al


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html