----- Original Message -----
Sent: Sunday, June 20, 2004 4:05 PM
Subject: [FlyRotary] LS1 Coil
Connector
Hey you guys, with all this chatter you could have built your own.
This was
a good job to give my wife. I taught her to solder and she
had them done an
hour later on one of those rare evenings she came to
help. I poured in a
little resin to fill the space, and later topped
it off with some RTV to
soften the transition. Cost: $0.
Dave
Leonard (a true Tracy Crook disciple)
I'll take that as a high complement Dave. Yes, a good solder joint
with proper strain relief is more reliable than any connector and cheaper
to boot. Good idea on the RTV topping, I didn't think of that!
Tracy