|
No, Dale, I ordered the 12582190 instead of the
12569111. The reason is that I was using the 12558948 coils which are a
bit different that the ones that Mark are using. They plugs may well be
interchangeable, but I didn't want to chance it. The plugs/harness I
ordered DO fit the 12558948 coils
One down side on the harness is that the leads are
fairly short in length which sort of restricts you in positioning the coils IF
you are going to use the harness as it. If you are simply going to clip
the plugs and attach new wires then of course it doesn't matter.
I am checking into a source of the plugs. I
have ordered the components needed to build up a plug and will check and see if
it fits. If so and you are willing to crimp the terminals on the ends of
the wire and install them in the plug then this source may be even less
expensive and you won't have to clip and splice wires..
I will let you know in the next week or
so.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
Sent: Saturday, June 19, 2004 10:52
AM
Subject: [FlyRotary] Re: LS1 Coils and
Harness II
Ed,
I have a question about the part
numbers, specifically
the harness number. Did you order a 12569111,
but they
sent you a 12582190?
And a question
for Mark Steitle:
Do Ed's connectors look like they will fit your #
1255693
coils?
ADVthanksANCE,
Dale R.
COZY MkIV-R13B
#1254
Here is the photos with the part
numbers
Ed
Ed Anderson
RV-6A N494BW Rotary
Powered
Matthews, NC
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html
|