----- Original Message -----
From: "Jim Maher" <DELTAFLYER@prodigy.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, May 23, 2004 6:14 PM
Subject: [FlyRotary] Re: Fiberglass Help!


Ed,
I have used the 7781 satin crowfoot weave with much success.
It has a much higher thread count which gives a smoother finish with less or
no pinholes while using less epoxy because of less space between the threads
to be filled. The weight is 8.9 ounces.
It also handles compound curves better than BID in my opinion.
Jim Maher

Hi Jim,

    Thanks for the information, I thought I might have screwed up ordering
the Crowfoot weave, but sounds like it will be ideal.  The weight I ordered
might be a bit on the light side at 3 3/4 oz, but I figure I can add another
layer (or two)  if necessary.

Ed