From: "David COOK hoursaway1@comcast.net" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=96.103.146.51; envelope-from=hoursaway1@comcast.net
Date: Tue, 7 May 2024 22:21:56 -0400 (EDT)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-ID: <519029158.823460.1715134916850@connect.xfinity.com>
In-Reply-To: <list-3137247@lancaironline.net>
References: <list-3137247@lancaironline.net>
Subject: Re: [FlyRotary] Bed Mount Installatiin
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Importance: Normal

Had the same seepage you spoke of, but I think it was coming from housing/i=
rons joints. Found many discrepancies in the build I purchased, paid too mu=
ch. After I rebuilt everything ( with new parts, many old worn parts found =
in orig. build ) I made sure I used a high quality break cleaner to degreas=
e sealing areas. Still used the same gray permatex. No more leaks.     Davi=
d R. Cook RV6A Rotary Mason MI.
> On 05/07/2024 9:37 PM EDT DOUGLAS LOMHEIM dlomheim@aol.com <flyrotary@lan=
caironline.net> wrote:
>=20
> =20
> My rebuild is coming along and I=E2=80=99ll soon need to install the Fred=
 Breeze =E2=80=9Cbed mount=E2=80=9D.  I did this per the original instructi=
ons in 2008 and when I recently filled it with oil it started to weep out t=
hru the grey permatex.   I there was wondering how you all did yours so it =
didn=E2=80=99t weep out oil???  Thanks for any lessons identified!  Doug
>=20
>=20
>=20
> Sent from my iPhone--
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/Lis=
t.html