Mailing List flyrotary@lancaironline.net Message #67174
From: Pam & Dave Williams padajute@idcnet.com <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Timing
Date: Thu, 24 Feb 2022 16:07:25 -0600
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>
Hello Steve,

My timing is locked in at 35 degrees before top dead center from idle to 6500 RPM. You are on the right track because retarded timing will raise exhaust temperature. I have a 13b with Tracy's EC2\EM2 and the RD-1AB redrive.

Thanks
Dave Williams

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Wednesday, February 23, 2022 6:45 PM
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: [FlyRotary] Timing


Hi friends

On my last flight I experienced high indicated EGT’s so as part of looking into this I would like to check my timing.

I have a Renesis engine and Tracy’s EC2.
In his A8 (Renesis) version of the handbook under Mode#8 Timing Adjustment it says to refer to ‘Initial Timing Adjustment’, however I can’t find any such instructions in this version, probably because it has a fixed position CAS.
Can anyone enlighten me on what the static timing should at a given idle rpm?

Much appreciated.

Steve Izett


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster