From: "Matt Boiteau mattboiteau@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.219.170; envelope-from=mattboiteau@gmail.com
MIME-Version: 1.0
References: <list-701271@logan.com>
In-Reply-To: <list-701271@logan.com>
Date: Thu, 24 Feb 2022 12:10:29 -0500
Message-ID: <CAP-UEKuFO5wWA_417Ly3oFGO0SHdK2po+E6+RWMFfvjiyMJ_ZQ@mail.gmail.com>
Subject: Re: [FlyRotary] Timing
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Type: multipart/alternative; boundary="0000000000006d282e05d8c6a9af"

--0000000000006d282e05d8c6a9af
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

I have yet to find any good info on timing for rx8..
This is supposed to be the default timing for OEM car, but I have no clue
if it's good for planes.
https://www.rx8club.com/series-ii-engine-tuning-164/series-ii-ecu-tuning-18=
8268/page40/#post4607979


- Matt Boiteau


On Wed, Feb 23, 2022 at 7:45 PM Stephen Izett stephen.izett@gmail.com <
flyrotary@lancaironline.net> wrote:

>
> Hi friends
>
> On my last flight I experienced high indicated EGT=E2=80=99s so as part o=
f looking
> into this I would like to check my timing.
>
> I have a Renesis engine and Tracy=E2=80=99s EC2.
> In his A8 (Renesis) version of the handbook under Mode#8 Timing Adjustmen=
t
> it says to refer to =E2=80=98Initial Timing Adjustment=E2=80=99, however =
I can=E2=80=99t find any
> such instructions in this version, probably because it has a fixed positi=
on
> CAS.
> Can anyone enlighten me on what the static timing should at a given idle
> rpm?
>
> Much appreciated.
>
> Steve Izett
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>

--0000000000006d282e05d8c6a9af
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">I have yet to find any good info on timing for rx8..<br>Th=
is is supposed to be the default=C2=A0timing for OEM car, but I have no clu=
e if it&#39;s good for planes.<br><a href=3D"https://www.rx8club.com/series=
-ii-engine-tuning-164/series-ii-ecu-tuning-188268/page40/#post4607979">http=
s://www.rx8club.com/series-ii-engine-tuning-164/series-ii-ecu-tuning-188268=
/page40/#post4607979</a><br><br><br clear=3D"all"><div><div dir=3D"ltr" cla=
ss=3D"gmail_signature" data-smartmail=3D"gmail_signature"><div dir=3D"ltr">=
<div><div dir=3D"ltr">- Matt Boiteau</div></div></div></div></div><br></div=
><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On We=
d, Feb 23, 2022 at 7:45 PM Stephen Izett <a href=3D"mailto:stephen.izett@gm=
ail.com">stephen.izett@gmail.com</a> &lt;<a href=3D"mailto:flyrotary@lancai=
ronline.net">flyrotary@lancaironline.net</a>&gt; wrote:<br></div><blockquot=
e class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px s=
olid rgb(204,204,204);padding-left:1ex"><br>
Hi friends<br>
<br>
On my last flight I experienced high indicated EGT=E2=80=99s so as part of =
looking into this I would like to check my timing.<br>
<br>
I have a Renesis engine and Tracy=E2=80=99s EC2. <br>
In his A8 (Renesis) version of the handbook under Mode#8 Timing Adjustment =
it says to refer to =E2=80=98Initial Timing Adjustment=E2=80=99, however I =
can=E2=80=99t find any such instructions in this version, probably because =
it has a fixed position CAS. <br>
Can anyone enlighten me on what the static timing should at a given idle rp=
m?<br>
<br>
Much appreciated.<br>
<br>
Steve Izett<br>
<br>
<br>
--<br>
Homepage:=C2=A0 <a href=3D"http://www.flyrotary.com/" rel=3D"noreferrer" ta=
rget=3D"_blank">http://www.flyrotary.com/</a><br>
Archive and UnSub:=C2=A0 =C2=A0<a href=3D"http://mail.lancaironline.net:81/=
lists/flyrotary/List.html" rel=3D"noreferrer" target=3D"_blank">http://mail=
.lancaironline.net:81/lists/flyrotary/List.html</a><br>
</blockquote></div>

--0000000000006d282e05d8c6a9af--