----- Original Message -----
Sent: Friday, March 19, 2004 10:14
AM
Subject: [FlyRotary] Re: Cooling
Ducts
I know you have a lot to get done and may decided
to put this off until the next revision, but thought I would throw it
out at this time - so I wouldn't hear later "Why didn't Ed tell
me?" {{:>)
You're
timing is improving :-) I'll be shaping foam today. I have a
(dumb) question about your MVC-033S picture. Is the rectangular
area toward the top of the picture showing the core as well, or do you really
want a full core size area of duct before the core?
Good point, Rusty, glad
you caught that. No - the core should be at the end of the bell
curve. The rectangular shape after that was just something for me to
hold on to as I handled the curves and keeping my mitts out of the way of the
coordinates.
Ed
I really
appreciate the info, and since I had no specific shape in mind, I'll lean
toward making them like you show in the pics. My goal is to make these
without my usual staring/pondering/fiddling/waste-of-time stage. When I
get to the hanger, I'll just start whacking foam, and see how it comes
out. At least I have an idea what to shoot for.
Thanks,
Rusty