From: "Matt Boiteau mattboiteau@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.217.49; envelope-from=mattboiteau@gmail.com
Content-Type: multipart/alternative;
 boundary="----=_NextPart_62115531.053453874040"
MIME-Version: 1.0
Date: Fri, 15 Nov 2019 02:42:56 -0500
Message-ID: <3c1accfc-7243-4c68-97a5-7c97b16d1300@getmailbird.com>
Subject: Re: [FlyRotary] Re: Renesis oil pressure
To: "Neil Unger 12348ung@gmail.com" <flyrotary@lancaironline.net>
In-Reply-To: <list-13179194@logan.com>
References: <list-13179194@logan.com>
User-Agent: Mailbird/2.5.43.0

------=_NextPart_62115531.053453874040
Content-Type: text/plain;
 charset="utf-8"
Content-Transfer-Encoding: quoted-printable

I installed an RX7 rear regulator and shimmed the front reg with 2 washers.=
 Also installed thermal pellet and weber jets in the e-shaft. Average aroun=
d 110-115psi during cruise, so I went with an 150psi sensor.

https://www.atkinsrotary.com/store/Competition-Eccentric-Shaft-Oil-and-Webe=
r-Jet-Kit-ARE103.html [https://www.atkinsrotary.com/store/Competition-Eccen=
tric-Shaft-Oil-and-Weber-Jet-Kit-ARE103.html]
https://www.atkinsrotary.com/store/79-11-Rx7-and-Rx8-Increased-Oil-Pressure=
-Kit-ARE401.html [https://www.atkinsrotary.com/store/79-11-Rx7-and-Rx8-Incr=
eased-Oil-Pressure-Kit-ARE401.html]
https://www.atkinsrotary.com/store/86-11-Rx7-and-Rx8-Atkins-Thermal-Pellet-=
ARE50.html?category_id=3D1275 [https://www.atkinsrotary.com/store/86-11-Rx7=
-and-Rx8-Atkins-Thermal-Pellet-ARE50.html?category_id=3D1275]

- Matt Boiteau
On 2019-11-14 11:53:30 PM, Neil Unger 12348ung@gmail.com <flyrotary@lancair=
online.net> wrote:
Fin, My renesis starts cold at 150 PSI. I let it idle at 2200 rpm
until after a few minutes it settles to 80 psi (plus).

Neil.

On 11/15/2019 10:45 AM, Finn Lassen finn.lassen@verizon.net wrote:
> I'm starting to look at engine monitor sensors for my RV-4.
>
> In his Renesis report, Tracy mentioned 100 psi oil pressures. Not
> clear if they dropped after the engine got some hours on it.
>
> What kind of oil pressures are you seeing?
>
> Should I go with a 150 psi or a 100 psi pressure sensor?
>
> Finn
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html

--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.ht=
ml

------=_NextPart_62115531.053453874040
Content-Type: text/html;
 charset="utf-8"
Content-Transfer-Encoding: quoted-printable

<body><div id=3D"__MailbirdStyleContent" style=3D"font-size: 10pt;font-fami=
ly: Arial;color: #000000">
                                        I installed an RX7 rear regulator a=
nd shimmed the front reg with 2 washers. Also installed thermal pellet and =
weber jets in the e-shaft. Average around 110-115psi during cruise, so I we=
nt with an 150psi sensor.<div><br><a href=3D"https://www.atkinsrotary.com/s=
tore/Competition-Eccentric-Shaft-Oil-and-Weber-Jet-Kit-ARE103.html">https:/=
/www.atkinsrotary.com/store/Competition-Eccentric-Shaft-Oil-and-Weber-Jet-K=
it-ARE103.html</a><br><a href=3D"https://www.atkinsrotary.com/store/79-11-R=
x7-and-Rx8-Increased-Oil-Pressure-Kit-ARE401.html">https://www.atkinsrotary=
.com/store/79-11-Rx7-and-Rx8-Increased-Oil-Pressure-Kit-ARE401.html</a><br>=
<a href=3D"https://www.atkinsrotary.com/store/86-11-Rx7-and-Rx8-Atkins-Ther=
mal-Pellet-ARE50.html?category_id=3D1275">https://www.atkinsrotary.com/stor=
e/86-11-Rx7-and-Rx8-Atkins-Thermal-Pellet-ARE50.html?category_id=3D1275</a>=
</div><div><br></div><div class=3D"mb_sig">- Matt Boiteau</div><blockquote =
class=3D"history_container" type=3D"cite" style=3D"border-left-style:solid;=
border-width:1px; margin-top:20px; margin-left:0px;padding-left:10px;">
                        <p style=3D"color: #AAAAAA; margin-top: 10px;">On 2=
019-11-14 11:53:30 PM, Neil Unger 12348ung@gmail.com &lt;flyrotary@lancairo=
nline.net&gt; wrote:</p><div style=3D"font-family:Arial,Helvetica,sans-seri=
f">Fin,=C2=A0 My renesis starts cold at 150 PSI.=C2=A0 I let it idle at 220=
0 rpm =0D<br>until after a few minutes it settles to 80 psi (plus).=0D<br>=
=0D<br>Neil.=0D<br>=0D<br>On 11/15/2019 10:45 AM, Finn Lassen finn.lassen@v=
erizon.net wrote:=0D<br>> I'm starting to look at engine monitor sensors fo=
r my RV-4.=0D<br>>=0D<br>> In his Renesis report, Tracy mentioned 100 psi o=
il pressures. Not =0D<br>> clear if they dropped after the engine got some =
hours on it.=0D<br>>=0D<br>> What kind of oil pressures are you seeing?=0D<=
br>>=0D<br>> Should I go with a 150 psi or a 100 psi pressure sensor?=0D<br=
>>=0D<br>> Finn=0D<br>>=0D<br>>=0D<br>> -- =0D<br>> Homepage:=C2=A0 http://=
www.flyrotary.com/=0D<br>> Archive and UnSub: =0D<br>> http://mail.lancairo=
nline.net:81/lists/flyrotary/List.html=0D<br>=0D<br>--=0D<br>Homepage:  htt=
p://www.flyrotary.com/=0D<br>Archive and UnSub:   http://mail.lancaironline=
.net:81/lists/flyrotary/List.html=0D<br></div></blockquote>
                                        </div></body>
------=_NextPart_62115531.053453874040--