From: "Matt Boiteau mattboiteau@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.161.44; envelope-from=mattboiteau@gmail.com
MIME-Version: 1.0
Date: Tue, 1 Oct 2019 12:44:27 -0400
Message-ID: <CAP-UEKsBxW1S2qKLtVi5t07utSeW-Dg0r3tO6qvHUrMrvWzU+w@mail.gmail.com>
Subject: Rebuilt and stuck apex seal
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Type: multipart/alternative; boundary="0000000000004bc3a70593dc1150"

--0000000000004bc3a70593dc1150
Content-Type: text/plain; charset="UTF-8"

I've rebuild the RX8 after it overheated on the ground. One apex seal is
not springy anymore after i fired it up. They were all springy after
rebuild. I can physically touch the seal since I'm p-ported.

Any hints before I tear it apart again? I warmed up the engine a few times,
so any superglue should of been burned off.

- Matt Boiteau

--0000000000004bc3a70593dc1150
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div dir=3D"auto">I&#39;ve rebuild the RX8 after it overheated on the groun=
d. One apex seal is not springy anymore after i fired it up. They were all =
springy after rebuild. I can physically touch the seal since I&#39;m p-port=
ed.=C2=A0<div dir=3D"auto"><br></div><div dir=3D"auto">Any hints before I t=
ear it apart again? I warmed up the engine a few times, so any superglue sh=
ould of been burned off.<br><br><div data-smartmail=3D"gmail_signature" dir=
=3D"auto">- Matt Boiteau </div></div></div>

--0000000000004bc3a70593dc1150--