From: "lehanover lehanover@aol.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=74.6.128.32; envelope-from=lehanover@aol.com
Date: Thu, 15 Aug 2019 17:12:21 +0000 (UTC)
To: flyrotary@lancaironline.net
Message-ID: <1611788614.4158270.1565889141361@mail.yahoo.com>
In-Reply-To: <list-12848934@logan.com>
References: <list-12848934@logan.com>
Subject: Re: [FlyRotary] Re: Slide throttle issues with engine dieing
MIME-Version: 1.0
Content-Type: multipart/alternative; 
	boundary="----=_Part_4158269_1881313597.1565889141361"
Content-Length: 2372

------=_Part_4158269_1881313597.1565889141361
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Another way to produce Smooth ID ducting is to use child's modeling clay. F=
orm up what you want in clay.
Smooth the surface with the clay warm to a perfect finish. Place in fridge =
until stiff. Paint on a thick coat of Styrene with baby powder=C2=A0mixed t=
ogether and let harden. Cover with 4 layers of glass cloth and resin. Epoxy=
 is fine as well and much stronger and more expensive. Same system as above=
.
Make a simple shape on a flat board and try it first. You can produce very =
complex shapes this way and remove the clay after complete with solvent. Go=
od for custom air horns and ducts.
Lynn E. Hanover=C2=A0 =C2=A0


------=_Part_4158269_1881313597.1565889141361
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 7bit

<div class="userEdit" style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;">
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;">Another way to produce Smooth ID ducting is to use child's modeling clay. Form up what you want in clay.<br></span></div>
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;">Smooth the surface with the clay warm to a perfect finish. Place in fridge until stiff. Paint on a thick coat of Styrene with baby powder</span><span style="font-size: 13.3333px;">&nbsp;mix</span><span style="font-size: 10pt;">ed together and let harden. Cover with 4 layers of glass cloth and resin. Epoxy is fine as well and much stronger and more expensive. Same system as above.</span></div>
<div><br></div>
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;">Make a simple shape on a flat board and try it first. You can produce very complex shapes this way and remove the clay after complete with solvent. Good for custom air horns and ducts.</span></div>
<div><br></div>
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;">Lynn E. Hanover&nbsp; &nbsp;<br></span></div>
<div><span style="font-family: arial, helvetica, sans-serif; font-size: 10pt; color: #000000;"><br></span></div>
</div>
<div class="quotedReply"><br></div>
------=_Part_4158269_1881313597.1565889141361--