|
Hi guys
Does anyone have the key to the parameters displayed on the EM3b Engine Information Page
In the EM3 manual it is activated by - Hold Ack (4), press Up (1) and called the EC3 Data Dump Mode
The only key I can find in the manuals is in the EC3 manual speaking about Mode#2 that says:
"If you have an EM3 engine monitor, you can check the setting of this parameter on the engine info page
by holding the Acknowledge button (button 4) and then pressing UP (button 1).
The dynamic range parameter is the 6th (next to last) number on line 4. The value is displayed in hexadecimal format.
Does anyone have the key to this table/display on the EM3?
Thanks
Steve Izett
|
|