From: "Stephen Izett stephen.izett@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.210.173; envelope-from=stephen.izett@gmail.com
Content-Type: text/plain;
	charset=us-ascii
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (Mac OS X Mail 12.2 \(3445.102.3\))
Subject: Re: [FlyRotary] Re: EC3 software
Date: Sat, 15 Jun 2019 21:50:56 +0800
References: <list-12678206@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-12678206@logan.com>
Message-Id: <6F6D7599-CAC3-42DA-86A1-B2D443AA5D14@gmail.com>

Hi Fin
Sorry. I missed your photo, but found it just now. Yes, appears no =
headers!
So we need a circuit diagram. Pins 16 &17 (PGD and PGC) of each =
processor would need to be accessed for in circuit programming me =
thinks.

Steve


> On 15 Jun 2019, at 9:35 pm, Finn Lassen finn.lassen@verizon.net =
<flyrotary@lancaironline.net> wrote:
>=20
> I thought I'd posted a picture of the EC3 on 12 June.
>=20
> Trying again.
>=20
> There are no header pins.
>=20
> Finn
>=20
> On 6/15/2019 9:28 AM, Stephen Izett stephen.izett@gmail.com wrote:
>> I only spent a few moments on it but the version of MPLABS I have =
didn't accept the PICkit3 for programming the
>> 18F452 processors which appears in Tracy???s notes as the EC3 =
processors.
>>=20
>> Have you looked inside your EC3? Are there 6 pin ICSP headers for in =
circuit programming like he EC2?
>>=20
>> Would like to hear from Tracy or someone else that has experience =
programmed the EC3.
>> We also need the config data for the compiler.
>>=20
>> Steve
>>=20
>>=20
>>=20
>> =20
>>=20
>>> On 15 Jun 2019, at 9:03 pm, Finn Lassen finn.lassen@verizon.net =
<flyrotary@lancaironline.net> wrote:
>>>=20
>>> I hope that's not true. What makes you think that?
>>>=20
>>> I just ordered https://www.ebay.com/itm/262583587324
>>> and https://www.ebay.com/itm/273846534119
>>> I figured I can connect the 6 wires directly to the DIP40 pins, =
bypassing the DIP40 socket.
>>>=20
>>> I still need to download MPLABS andget familiar with that, but =
that's several weeks in the future.
>>>=20
>>> Finn
>>> (Currently fighting with the RV-4 cowl and trying to determine which =
radiator(s) and oil cooler to use.)
>>>=20
>>>=20
>>> On 6/15/2019 6:05 AM, Stephen Izett stephen.izett@gmail.com wrote:
>>>> Hi Fin
>>>>=20
>>>> Ive spent a few moments looking at the EC3 code.
>>>> I???ve previously updated the settings of my EC2 using the method =
discussed previously, using MPLABS and a PICkit3,
>>>> however having looked at the EC3???s processor details I???m not =
sure if it can be programmed with a tool like the PICkit3.
>>>> I???ll need to look further into this.
>>>> I???m hoping Tracy might be able to enlighten us re programming the =
EC3 processors and the config settings required.
>>>>=20
>>>> Does anyone else have the details re programming the EC3 etc.
>>>>=20
>>>> Steve Izett
>>>>> On 11 Jun 2019, at 10:07 pm, Stephen Izett stephen.izett@gmail.com =
<flyrotary@lancaironline.net> wrote:
>>>>>=20
>>>>> See pdf of an EC2 circuit board showing in-circuit programming =
headers. The EC3 will be similar.
>>>>> <EC2 Board.pdf>
>>>>>=20
>>>>>> On 11 Jun 2019, at 9:10 pm, Finn Lassen finn.lassen@verizon.net =
<flyrotary@lancaironline.net> wrote:
>>>>>>=20
>>>>>> Something like this?
>>>>>> =
https://www.ebay.com/itm/PICKit3-Microchip-Programmer-w-USB-cable-wires-Pi=
c-Kit-3-and-ICSP-Socket/391965539252?hash=3Ditem5b42f77bb4:g:je8AAOSw86JaY=
6CJ:sc:USPSFirstClass!32619!US!-1
>>>>>>=20
>>>>>> and this?
>>>>>> =
https://www.ebay.com/itm/Plcc44-to-dip40-usb-universal-programmer-ic-adapt=
er-tester-socket-LB/273846534119?_trkparms=3Daid%3D555018%26algo%3DPL.SIM%=
26ao%3D1%26asc%3D57921%26meid%3Db074d810b54f4576947055bf696657dc%26pid%3D1=
00005%26rk%3D4%26rkt%3D12%26sd%3D273856754141%26itm%3D273846534119&_trksid=
=3Dp2047675.c100005.m1851
>>>>>>=20
>>>>>> What is a 6-way header?
>>>>>>=20
>>>>>> I wonder if the above programmer will work with MPLabs (a 744 MB =
download!)
>>>>>> =
https://www.microchip.com/mplab/mplab-x-ide?gclid=3DCj0KCQjwov3nBRDFARIsAN=
gsdoGRjNrAf5W07wtNtIBqL4MdFvN4apzRq5hhCoPP7bXzELwMPrM-RbQaAtixEALw_wcB
>>>>>>=20
>>>>>> Finn
>>>>>>=20
>>>>>> On 6/11/2019 12:26 AM, Stephen Izett stephen.izett@gmail.com =
wrote:
>>>>>>> I use a PICkit 3 programmer which I imagine are about $50USD.
>>>>>>> This plugs into the 6 way (from memory) headers along side of =
each of the pic processors.
>>>>>>=20
>>>>>> --
>>>>>> Homepage:  http://www.flyrotary.com/
>>>>>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>>> --
>>>>> Homepage:  http://www.flyrotary.com/
>>>>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>> --
>>>> Homepage:  http://www.flyrotary.com/
>>>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>>=20
>>>=20
>>> --
>>> Homepage:  http://www.flyrotary.com/
>>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>=20
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>=20
>=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html