Mailing List flyrotary@lancaironline.net Message #64895
From: Sam Hoskins sam.hoskins@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EC3 software
Date: Sat, 15 Jun 2019 15:04:18 +0200
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Do you see anything in the EC3 software that would select between a rotary engine and a four cylinder Continental? 

On Sat, Jun 15, 2019, 12:06 PM Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
Hi Fin

Ive spent a few moments looking at the EC3 code.
I’ve previously updated the settings of my EC2 using the method discussed previously, using MPLABS and a PICkit3,
however having looked at the EC3’s processor details I’m not sure if it can be programmed with a tool like the PICkit3.
I’ll need to look further into this.
I’m hoping Tracy might be able to enlighten us re programming the EC3 processors and the config settings required.

Does anyone else have the details re programming the EC3 etc.

Steve Izett
> On 11 Jun 2019, at 10:07 pm, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
>
> See pdf of an EC2 circuit board showing in-circuit programming headers. The EC3 will be similar.
> <EC2 Board.pdf>
>
>> On 11 Jun 2019, at 9:10 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
>>
>> Something like this?
>> https://www.ebay.com/itm/PICKit3-Microchip-Programmer-w-USB-cable-wires-Pic-Kit-3-and-ICSP-Socket/391965539252?hash=item5b42f77bb4:g:je8AAOSw86JaY6CJ:sc:USPSFirstClass!32619!US!-1
>>
>> and this?
>> https://www.ebay.com/itm/Plcc44-to-dip40-usb-universal-programmer-ic-adapter-tester-socket-LB/273846534119?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D57921%26meid%3Db074d810b54f4576947055bf696657dc%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D273856754141%26itm%3D273846534119&_trksid=p2047675.c100005.m1851
>>
>> What is a 6-way header?
>>
>> I wonder if the above programmer will work with MPLabs (a 744 MB download!)
>> https://www.microchip.com/mplab/mplab-x-ide?gclid=Cj0KCQjwov3nBRDFARIsANgsdoGRjNrAf5W07wtNtIBqL4MdFvN4apzRq5hhCoPP7bXzELwMPrM-RbQaAtixEALw_wcB
>>
>> Finn
>>
>> On 6/11/2019 12:26 AM, Stephen Izett stephen.izett@gmail.com wrote:
>>> I use a PICkit 3 programmer which I imagine are about $50USD.
>>> This plugs into the 6 way (from memory) headers along side of each of the pic processors.
>>
>>
>>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster