From: "Stephen Izett stephen.izett@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.210.182; envelope-from=stephen.izett@gmail.com
Content-Type: text/plain;
	charset=utf-8
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (Mac OS X Mail 12.2 \(3445.102.3\))
Subject: Re: [FlyRotary] Re: Rubber Damper Group Buy - Part have arrived.
Date: Tue, 11 Jun 2019 10:05:00 +0800
References: <list-12660075@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-12660075@logan.com>
Message-Id: <F3314049-D210-4486-9720-BE1339E727F8@gmail.com>

Hy Bobby

It looks like we will have you ship them to us in Western Australia =
separately.

Steve Izett
7 Beckley Circle
Leeming, Perth
Western Australia 6149=20

Let me know the cost and I=E2=80=99ll send it through.

Thanks again for helping us all out here.

Steve Izett

> On 10 Jun 2019, at 9:47 pm, Bobby J. Hughes bhughes@qnsi.net =
<flyrotary@lancaironline.net> wrote:
>=20
> Over the weekend I was able to swap out the dampers on my RV10. It =
took about an hour without removing the gearbox or lower cowl. The first =
one took about 30 minutes and the other three less than 10 minutes each. =
The secret is to not completely remove the bolt and dislodge the large =
washer between the flex plate and damper plate. Most work was done at =
the 10-11 o=E2=80=99clock position as viewed from the prop. I found that =
prying out the old damper and busing was easer at the 4 o=E2=80=99clock =
position.=20
> =20
> Tools and method:=20
> Two box end wrenches. =E2=80=93 one ratcheting for the bolt head.=20
> Small 90 degree needle nose pliers. =E2=80=93 used to grip the bushing =
during removal.=20
> Small tip screw driver  - used to push through the old damper against =
the bushing to pry old damper out of the cavity.=20
> Work the new damper into the slot with the beveled edge for the =
bushing facing the prop.=20
> Insert bushing and reinstall hardware.
> =20
> I have everyone shipping information except for the following list.=20
> =20
> Dave Williams
> 24
> William Mason
> 24
> Raymond Lambert
> 24
> Dave Reyenga
> 24
> Luis Luciano
> 24
> =20
> =20
> Australia
> =20
> Steve Izett
> 24
> Andrew Martin
> 24
> Nils Hansen
> 24
> =20
> Thanks,
> =20
> Bobby
> From: Bobby J. Hughes=20
> Sent: Thursday, June 06, 2019 11:39 AM
> To: Rotary motors in aircraft
> Cc: 'lucky9020@gmail.com'; 'rv9flyer13b@gmail.com'; =
'ne14yah@gmail.com'; 'karinils@bigpond.com'; Bobby J. Hughes
> Subject: Rubber Damper Group Buy - Part have arrived.=20
> =20
> All,
> =20
> It took a long time but the dampers have arrived. We had better than =
expected participation so I was able to reduce the quantities per =
individual to (24) units instead of the original (40). This also reduced =
the USPS One-Rate box size and shipping cost. The delivered cost in the =
US for (24) units will be $42.72 or $1.78 per units. Three of us will =
keep (40) units each in case I missed someone or others need the parts =
in the future.=20
> =20
> What I need now is your mailing address, email address and phone =
numbers. Please email me directly at  bhughes@qnsi.net.
> =20
> Three individuals are in Australia and I need to know how to ship. =
USPS one rate small boxes are $38.00  x 3 or one medium is $82.00 and =
would need to be split up and mailed within in Australia.=20
> Steve Izett
> 24
> Andrew Martin
> 24
> Nils Hansen
> 24
> karinils@bigpond.com
> =20
> Damper cost $1.45 x 24 =3D $34.80 USD. Plus shipping.   =20
> =20
> Once I have the mailing address information I get the parts boxed and =
shipment scheduled. My business travel schedule is heavy so please be =
patient. Still working on how to collect payment. It will likely be =
checks, PayPal or Venmo.=20
> =20
> Bobby Hughes
> 40
> Local Austin=20
> Charlie England
> 40
> Air freight from Austin J
> Dennis Haverlah
> 40
>  Local Austin
> Kelly Troyer
> 24
> =20
> Dave Williams
> 24
> =20
> Tracy Hallock
> 24
>  Local San Marcos
> Steve Boese
> 24
> =20
> Todd Bartrim
> 24
> =20
> Sam Hodges
> 24
> =20
> Gary Luchini
> 24
> =20
> William Mason
> 24
> Raymond Lambert
> 24
> =20
> Doug Lomheim
> 24
> Chris Sargent
> 24
> =20
> Michael Silvius
> 24
> =20
> Finn Lassen
> 24
> =20
> Jeff Whaley
> 24
> =20
> Dave Reyenga
> 24
> =20
> Brandt Hall
> 24
> Luis Luciano
> 24
> =20
> =20
> =20
> =20
> Steve Izett
> 24
>  Australia
> Andrew Martin
> 24
>  Australia
> Nils Hansen
> 24
> Australia
> =20
> =20
> =20
> =20
> Thanks,
> =20
> Bobby J. Hughes