flyrotary@lancaironline.net Mailing List Archive

Hi Sam,

I actually haven't figured that out yet.

It's been decades since I did assembler programming. So I need to get a development system together for it.

The source code can be read using any text editor.

I think there is a free development studio downloadable from Microchip Technology for the 18F452 chip.
Maybe something like this:
https://sourceforge.net/projects/picsim/

I also need to get a (flash) programmer interface (hardware) for it.

I'll keep the list updated as I find out more. Others, please do the same.

Finn

On 6/10/2019 11:05 AM, Sam Hoskins sam.hoskins@gmail.com wrote:

What do you need for an interface for reading and writing???

On Fri, Jun 7, 2019, 11:47 AM Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:

If no reply from Tracy, I do have a copy.

However, be warned that you'll probably have to read and understand all
of the code before making any changes.

He's currently playing with the SpeedUnio software and board and is very
impressed with it, especially working together with TunerStudio. The
software is open source and TunerStudio Pro has auto tuning enabled.

Finn

On 6/7/2019 10:37 AM, Stephen Izett stephen.izett@gmail.com wrote:
> Hi there Tracy
>
> I seem to have lost your PM.
>
> Have you released the EC3 code. Could I have a copy please as I may need to reprogram for turbo.
>
> Thanks
>
> Steve Izett
>
>
> --
> Homepage:?? http://www.flyrotary.com/
> Archive and UnSub:?? ??http://mail.lancaironline.net:81/lists/flyrotary/List.html
>

--
Homepage:?? http://www.flyrotary.com/
Archive and UnSub:?? ??http://mail.lancaironline.net:81/lists/flyrotary/List.html