I have an EC3 installed in my
O-200 powered Quickie Q-200. I
was wondering if anyone might have any suggestions.?? I need
a simple (famous last words) programming change and was
wondering if anyone might have any idea how I might do this.
The problem is, the spark is not retarded during starting
and all too often I get a nasty kickback. Doesn't happen all
the time, but it still occurs.?? I have figured out that
first running the starter without the ignition turned on
seems to "loosen up" the engine and I have a better chance.
This kickback has resulted in damage to the starter bearing
and I have returned it to B&C for repairs.
The circuit hoard has two main chips which are removable.
The "A" side is the main controller for normal operations
and the "B" side is the redundant side.??
Is there any someone could figure out what programming
language was used, then modify it a bit?
Tracy programmed Lyn French's controller to retard the
spark during starting, so I know it can be done.
If I can't make this programming change, I'll have to
spend $3,000 - 5,000, installing another system, such as
SDS, so I'm making a last ditch attempt.?? I would
appreciate your thoughts.
Thanks.
Sam