|
Does anyone have a suggestion for an
electric fuel pump for the 13b using a carb?
Joe Berki
If you want AN-6 fittings, Facet 40108.
Tech info:
https://www.facet-purolator.com/tech-information/
This is the pump that Van's a/c sells for their carb engines. You
can plumb two in series (but only run one at a time if you do
that), or in parallel, for backup. Note that the tech sheet says 'no
check valve', but by design, fuel can't flow backward through the
pump.
If you want different fittings (hose barb, etc), you can get the
same pump spec with 1/8" NPT on both ends. Just look through that
tech sheet for the one that meets your needs.
One caution: You *don't* want one with 'positive' (positive
cutoff). Those block forward flow unless the pump is running.
Charlie
|
|