Mailing List flyrotary@lancaironline.net Message #64350
From: Kelly Troyer keltro@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Ignition System
Date: Sun, 23 Sep 2018 21:00:45 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Steve, 
     I get the general idea but would you happen to have a photo of the shape of the extended washer
needed to activate the sensor.........a photo is worth a thousand words...........<:)

Kelly Troyer

On Sun, Sep 23, 2018 at 6:57 PM, Steven W. Boese SBoese@uwyo.edu <flyrotary@lancaironline.net> wrote:

Joe,


When performing a dynamic balance of the engine and RD-1C, a CAS was mounted in the flexplate area as a position reference.  A washer with an extended portion was placed on one of the bolts holding the damper plate to the flexplate to activate the sensor.  A washer of equal weight without the extended portion was placed on the opposite bolt to maintain balance.  This required no modification of the original parts.


Steve Boese





Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster