I’m guessing the new system will be a total loop of AN10 1500mm through 6 90deg fittings Mocal 44 row cooler (<6psi pressure drop) and remote spin on K&N oil filter. Steve Izett > On 1 Aug 2018, at 8:22 pm, Charlie England ceengland7@gmail.com <flyrotary@lancaironline.net> wrote: > > 10mm= ~0.394 inches > AN-8= 0.50 Inches > > Do you have really long runs of oil lines? > > On Wed, Aug 1, 2018 at 1:30 AM, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote: > Hi guys > I measured the oil passage diameters (bearing and regulator passages) under the oil filter pedestal of a Renesis today. > They are 10mm in case anyone else was wondering. > I don’t know what possessed me all those years ago, but I plumbed the oil system in AN-8. > I contest Neil’s claim of being the greatest idiot. > In the process of rebuilding it with a AN-10 plumbing and using a Mocal 44 row cooler. > > Still close to finished! > > Cheers > > Steve Izett > Glasair Super IIRG Renesis 4 port RD-1C EC3 EM3 > > > > On 31 Jul 2018, at 7:47 pm, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote: > > > > Hi guys > > Does anyone know off hand or have a rear housing handy to measure the oil passage diameters (bearing and regulator passages) under the oil filter pedestal of a Renesis? > > Much appreciated. > > > > Steve Izett > > -- > > Homepage: http://www.flyrotary.com/ > > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html > -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html