Mailing List flyrotary@lancaironline.net Message #64149
From: Jeff Whaley jwhaley@datacast.com <flyrotary@lancaironline.net>
Subject: RE: [flyrotary ] RE: Tension Bolts
Date: Tue, 3 Jul 2018 14:41:02 +0000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Rich, my engine is a 1988 13B, normally aspirated, aluminum plate bed mount, so the engine is held in-place by the oil pan bolts.  The aluminum plate and engine mount are of my own design and construction.
Jeff


-----Original Message-----
Thanks Jeff

Which model of rotary

What kind of engine mount

Any other modifications to the engine

Rich

-----Original Message-----
From: Jeff Whaley
Sent: July-03-18 9:54 AM
To: Rotary motors in aircraft
Subject: RE: [flyrotary ] RE: Tension Bolts

FWIW:  I had one broken tension bolt on spark plug side of the engine; not exactly sure which one but it was around the 10 o'clock position if looking at the bolt heads end.  The bolt broke in the threaded portion right where the threads were no longer engaged with the housing ... this was posted way back in 2011 ... see message #53485.  Jeff


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster