Martin, When I inspected engine I only needed soft parts, made my own o rings from cord for the sizes not available off the shelf here. Was a bit hesitant to do it at first, but mazda had no stock in Aus. Wouldn’t hesitate to do same again as very easy & was able to make orings that were exactly right size. I heard some premade seals can be a bugger to install if size is slightly off. Any industrial seal supplier can get right sizes, Transeals in Perth can supply everything needed. Andrew From what I've seen the best is from Tracy Crooks old firm. Real world
solutions. Seem to be just as cheap as within OZ. Neil.
On 6/22/2018 3:48 PM, Martin King martin.king@pobox.com wrote:
> Which way rotarians?
>
> I'm after a full/master seal kit is there a good supplier of these in
> Aus or are they best sourced off-shore?
> I've also just had a pleasant visit to Stephen Izett's hangar and his
> very tidy rotary installation. Thanks again Stephen. Now I just need a
> plane...
>
> MK
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
Regards
Andrew Martin
Martin Ag
|