X-Virus-Scanned: clean according to Sophos on Logan.com From: Received: from omr-m012e.mx.aol.com ([204.29.186.12] verified) by logan.com (CommuniGate Pro SMTP 6.2c1) with ESMTPS id 9689197 for flyrotary@lancaironline.net; Thu, 20 Apr 2017 17:04:32 -0400 Received-SPF: pass receiver=logan.com; client-ip=204.29.186.12; envelope-from=ARGOLDMAN@aol.com Received: from mtaomg-aal02.mx.aol.com (mtaomg-aal02.mx.aol.com [172.27.20.208]) by omr-m012e.mx.aol.com (Outbound Mail Relay) with ESMTP id 106E4380008C for ; Thu, 20 Apr 2017 17:04:14 -0400 (EDT) Received: from core-abc04d.mail.aol.com (core-abc04.mail.aol.com [172.27.9.14]) by mtaomg-aal02.mx.aol.com (OMAG/Core Interface) with ESMTP id 77DB038000081 for ; Thu, 20 Apr 2017 17:04:13 -0400 (EDT) Full-name: ARGOLDMAN Message-ID: <350d8.740c1e4.462a7c4d@aol.com> Date: Thu, 20 Apr 2017 17:04:13 -0400 Subject: Re: [FlyRotary] Re: eccentric (crank) case ventalation To: flyrotary@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_350d8.740c1e4.462a7c4d_boundary" X-Mailer: AOL 9.8 sub 2019 X-Originating-IP: [23.25.33.118] x-aol-global-disposition: G DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20150623; t=1492722254; bh=2Hm9HyE6Dw83i/A+odfh+MwO/ii3GKvyvcZKvWQOBSg=; h=From:To:Subject:Message-ID:Date:MIME-Version:Content-Type; b=7X4K50aPRi0Avkw0rHPyATqcxbUN13vCEzIyPShQCR5Xf8f4R9hY3WXN4IAuSki3E 0TwU36VIr2SsuC6A2boaaK4epA2AaEj7bXzYZSRjGqABRuw5we2Znz/pNuPyijhDPa QpCjSDrEhZ61DlD3ejxSzuno4vBKE0bKuI57AplQ= x-aol-sid: 3039ac1b14d058f9224d4688 --part1_350d8.740c1e4.462a7c4d_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit From one eccentric (shaft) guy to all you eccentrics-- thank you for all your inputs Rich In a message dated 4/20/2017 1:11:53 P.M. Central Daylight Time, flyrotary@lancaironline.net writes: I used a clear tube run down back dumps just inside the lower part of cowl exit, if anything drips I should spot it but all I have seen is some minor moisture in tube & yes 5/16" port near top of filler tube. RV6A 13B Rotary David ____________________________________ From: "ARGOLDMAN" To: "Rotary motors in aircraft" Sent: Thursday, April 20, 2017 11:54:41 AM Subject: [FlyRotary] eccentric (crank) case ventalation I am finally finishing my renesis rebuild, with so much help from this list-- thanks My question is with regard to the ventilation of the case. it seems that the rotary has a nipple off of the filler tube for this purpose... (I don't think that I have that tube currently and will probably make one) Using this port, is it a good idea to just plumb it out of the back of the airplane as with a crank case vent? Is the amount of oil/vapor created significant enough to collect it and recycle it? What ch'all doing? Thanks again, Rich --part1_350d8.740c1e4.462a7c4d_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
From one eccentric (shaft) guy to all you eccentrics--
 
thank you for all your inputs
 
Rich
 
In a message dated 4/20/2017 1:11:53 P.M. Central Daylight Time,=20 flyrotary@lancaironline.net writes:
I used a clear tube run down back dumps= just=20 inside the lower part of cowl exit, if anything drips I should spot it= but all=20 I have seen is some minor moisture in tube & yes 5/16" port near top= of=20 filler tube.   RV6A 13B Rotary  David

From:=20 "ARGOLDMAN" <flyrotary@lancaironline.net>
To: "Rotar= y=20 motors in aircraft" <flyrotary@lancaironline.net>
Sent:=20 Thursday, April 20, 2017 11:54:41 AM
Subject: [FlyRotary]= =20 eccentric (crank) case ventalation

I=20 am finally finishing my renesis rebuild, with so much help from this lis= t--=20 thanks
 
My question is with regard to the ventilation of the case. it= seems=20 that the rotary has a nipple off of the filler tube for this purpose...= (I=20 don't think that I have that tube currently and will probably make=20 one)
 
Using this port, is it a good idea to just plumb it out of th= e back=20 of the airplane as with a crank case vent?
Is the amount of oil/vapor created significant enough to coll= ect it=20 and recycle it?
 
What ch'all doing?
 
Thanks again,
 
Rich



 --part1_350d8.740c1e4.462a7c4d_boundary--