Mailing List flyrotary@lancaironline.net Message #63326
From: Bobby J. Hughes <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: eccentric (crank) case ventilation
Date: Thu, 20 Apr 2017 12:48:38 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>

I have a one inch vent has an oil/ air separator. Positive pressure with the super charger. My turbo engine will likely have more vent area.

 

Bobby

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Thursday, April 20, 2017 1:15 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: eccentric (crank) case ventalation

 

I just tubed it over to the air filter box, but I've always been curious as to what others are doing with this as well, but just never bothered to ask.


Todd Bartrim

 

On Thu, Apr 20, 2017 at 8:54 AM, ARGOLDMAN <flyrotary@lancaironline.net> wrote:

I am finally finishing my renesis rebuild, with so much help from this list-- thanks

 

My question is with regard to the ventilation of the case. it seems that the rotary has a nipple off of the filler tube for this purpose... (I don't think that I have that tube currently and will probably make one)

 

Using this port, is it a good idea to just plumb it out of the back of the airplane as with a crank case vent?

Is the amount of oil/vapor created significant enough to collect it and recycle it?

 

What ch'all doing?

 

Thanks again,

 

Rich

 

 

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster