Hey Steve,
Just re-read your post with the measurements, & I'm not sure
which had higher current draw. It was the bottom pump, right?
Thanks,
Charlie
On 3/24/2017 8:06 AM, Stephen Izett wrote:
Good idea Charlie.
That would clear it up as far as the manifold flow
characteristics.
Just a pain in the but to get to.
Thanks
Steve
Have you tried swapping the
position of the pumps & making the same
measurements? It's hard to imagine it making that much
difference, but the bottom pump does have a tight
right turn and then a sharp edged 'T' turn to the
left. I couldn't guess how much, but that would
account for at least some pressure increase.
Charlie
|