Mailing List flyrotary@lancaironline.net Message #62674
From: Ed Anderson <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Crimped Pins
Date: Thu, 28 Jul 2016 12:52:59 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Hi Kelly,
 
I have not heard of anyone coating the ends with Die-electric Grease – I certainly don’t see how it would do anything but help – unless the grease might possibly interferer with crimp forces – which I don’t see how it would. Any excess grease would simply be pushed out the open end of the pin.
Good idea.
 
Ed
Sent: Thursday, July 28, 2016 12:43 PM
Subject: [FlyRotary] Crimped Pins
 

Ed Anderson
Jul 24 (4 days ago)
to Rotary
Hi Andrew
 
Here is one source for the machined pins and the 4 indent crimper, there are other sources, but these have   worked well for me.
 
 
 
Ed,
 
  Has anyone ever suggested if coating the wire ends in "Die-electric Grease"
before inserting into the pin/socket and crimping would be of help preventing
possible high resistance corrosion from forming ??.............Inquiring minds
would like to know !!.............<:)
 
Best,
Kelly Troyer
 
 
 
 
 

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7442 / Virus Database: 4627/12699 - Release Date: 07/28/16

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster