From: "steve Izett" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.220.42; envelope-from=steveize@gmail.com
Content-Type: text/plain; charset=us-ascii
Mime-Version: 1.0 (Mac OS X Mail 9.3 \(3124\))
Subject: Re: [FlyRotary] Re: Engine miss
In-Reply-To: <list-8830863@logan.com>
Date: Thu, 28 Jul 2016 19:27:24 +0800
Content-Transfer-Encoding: quoted-printable
Message-Id: <FC4BAB39-24B0-46B0-A03A-77F1114DF332@gmail.com>
References: <list-8830863@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>

Way to go Andrew.
All the very best for the next testing.
Steve Izett
> On 28 Jul 2016, at 6:32 PM, Andrew Martin =
<flyrotary@lancaironline.net> wrote:
>=20
> I borrowed a 50 ohm dummy load thing to put on the antennae end of the =
coax, no engine trouble on transmit, so apparently this confirmed =
problem is RF radiation interference from antennae and cabling all =
good.(antennae is about 3m from panel but apparently were to expect more =
of this as radios keep getting more powerful).
>=20
> Added Tracy's fix to EC2 (got the only .1uF cap in our local hobby =
shop).
> started engine, transmitted, engine perfect. so I'm saying its fixed.
>=20
> So thankyou to everyone that helped with suggestions. I still don't =
quite understand why this problem took so long to surface, I have 9.5 =
hrs ground running time on the hobbs & 4min flight time, guess it must =
have only become noticeable as the tune got better. also for most of the =
time I've been fixated on fixing temps.=20
>=20
> Will give the plane a very thorough pre-flight tomorrow arvo for =
hopefully a longer flight on Saturday.=20
>=20
> Andrew Martin
> Lightwing sp4000
> Renesis RD1c EC2 EM2
> GT CS
>=20
>=20