From: <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=68.66.77.82; envelope-from=btilley@mchsi.com
Date: Sun, 17 May 2015 08:31:43 -0400 (EDT)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-ID: <929730340.42413544.1431865903029.JavaMail.zimbra@mchsi.com>
In-Reply-To: <list-7696421@logan.com>
References: <list-7696421@logan.com>
Subject: Re: [FlyRotary] Re: 12A, anyone?
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Thread-Topic: 12A, anyone?
Thread-Index: 7nFXY1CE6ersA18GZgSA8uBlYXb5Sg==

Rich, 

If you really want it I can pick it up and deliver it at Osh.

Bob Tilley

----- Original Message -----
From: "ARGOLDMAN" <flyrotary@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, May 16, 2015 10:36:49 PM
Subject: [FlyRotary] Re: 12A, anyone?

Thanks,
 
Too far for me to walk.
 
Rich
 
 
In a message dated 5/16/2015 10:38:15 A.M. Central Daylight Time,  
flyrotary@lancaironline.net writes:

Sorry Rich; I must have it, too. Should have specified when I  sent the 
offer.  


I'm about 10 miles north of Jackson MS USA at Slobovia Outernational  
(MS71).


On Sat, May 16, 2015 at 9:22 AM, ARGOLDMAN <_flyrotary@lancaironline.net_ 
(mailto:flyrotary@lancaironline.net) > wrote:


A real pain in the ass-- either my fingers or the computer I anm  using
 
Where are you located?
 
Rich  (sorry for the multiple sendings
 
 
In a message dated 5/16/2015 9:20:06 A.M. Central Daylight Time, 
_flyrotary@lancaironline.net_ (mailto:flyrotary@lancaironline.net)  writes:

 that Where ya  located
 
Rich
 
 
In a message dated 5/16/2015 9:17:07 A.M. Central Daylight Time, 
_flyrotary@lancaironline.net_ (mailto:flyrotary@lancaironline.net)  writes:

here ya located charlie?
 
 
In a message dated 5/16/2015 8:05:32 A.M. Central Daylight Time, 
_flyrotary@lancaironline.net_ (mailto:flyrotary@lancaironline.net)  writes:

I'm trying to clean out my junk room (hangar), and I have  a 12A engine 
core that I'll never use. The basic block is complete  & flywheel is still 
installed, but no distributor, pulleys, etc.  Water pump has been removed, but 
it's still sitting with the motor at  the moment. It's been sitting for years 
without spark plugs in the  housing, but still turns easily using the 
flywheel.  


Herb Sanders gave it to me many years ago, and if anyone has any  use for 
it, it's yours for the same price (which is 'come and get  it').


If no one bites, or can give me a compelling reason to hang on to  it, it's 
going to the road where some recycler will pick it up.


Charlie