On 11/24/2013 12:35 PM, Bobby J.
Hughes wrote:
Charlie
Do you have any pictures of your engine mount you can share? Particularly the lower rear attachments to the engine block. I remember you had a unique solution but I don't recall the details.
Bobby Hughes
Sent from my iPad
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
Bottom view below. Note that the square tube that connects the
two 'tripods' on the firewall side would have been more
functional if it had been welded between the two adapters,
with the sleeves welded to the two 'tripods' on the firewall
side. The reason is that the square tube would have provided a
hard connection between the two adapters, removing any risk of
'racking' load on the bolts/studs attaching them to the
engine. That's how I'd have built it if I'd not been too dense
to picture what Monty Roberts was trying to describe while I
was designing & building the mount.
The adapters are *way* overbuilt; most of the parts could have
been made from .062 instead of .125 4130.
<bottom view small.jpg>