Mailing List flyrotary@lancaironline.net Message #60332
From: <hoursaway1@comcast.net>
Subject: Re: [FlyRotary] Re: 05 RX8 rollover-no-start in my shop.
Date: Thu, 24 Oct 2013 23:54:37 +0000 (UTC)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Ok will get started tomorrow & will let you know the results.  David R. Cook  RV6A Rotary  ( need some air time this weekend.)


From: Lehanover@aol.com
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, October 24, 2013 6:00:41 PM
Subject: [FlyRotary] Re: 05 RX8 rollover-no-start in my shop.

Eazy-off oven cleaner used to work like magic. It was the last resort before a teardown. They have dummed it down now because it used to take off your skin. But it might work. You can cycle the apex seals through the leading (Lower) plug holes. Use a wooden dowel. It is a caustic so it will damage aluminum. If the engine starts, then no foul.
If not you were going to take it apart anyway. Wear eye protection.
 
Lynn E. Hanover
 
In a message dated 10/24/2013 5:42:18 P.M. Eastern Daylight Time, shipchief@aol.com writes:
Agree on 50/50 ATF / Acitone, Dave Atkins says it's carbon build up, so next try a soak with a carbon remover.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster