Mailing List flyrotary@lancaironline.net Message #60331
From: <Lehanover@aol.com>
Subject: Re: [FlyRotary] Re: 05 RX8 rollover-no-start in my shop.
Date: Thu, 24 Oct 2013 18:00:41 -0400 (EDT)
To: <flyrotary@lancaironline.net>
Eazy-off oven cleaner used to work like magic. It was the last resort before a teardown. They have dummed it down now because it used to take off your skin. But it might work. You can cycle the apex seals through the leading (Lower) plug holes. Use a wooden dowel. It is a caustic so it will damage aluminum. If the engine starts, then no foul.
If not you were going to take it apart anyway. Wear eye protection.
 
Lynn E. Hanover
 
In a message dated 10/24/2013 5:42:18 P.M. Eastern Daylight Time, shipchief@aol.com writes:
Agree on 50/50 ATF / Acitone, Dave Atkins says it's carbon build up, so next try a soak with a carbon remover.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster