flyrotary@lancaironline.net Mailing List Archive

Joe,

I would not use the stock Mazda oil cooler mounts in an aircraft........They are rubber

bonded to metal with no failsafe in case of failure of the bond........I have seen several

mounts that encapsulate the cooler at the end caps between metal with rubber or other

cushioning material providing the vibration isolation..........FWIW

Kelly Troyer

On Sat, Oct 12, 2013 at 7:55 AM, John <downing.j@sbcglobal.net> wrote:

Joe, I used the rubber panel mounts that are used in some production aircraft. JohnD
----- Original Message ----- From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, October 12, 2013 8:45 AM
Subject: [FlyRotary] Re: 2nd gen oil cooler mount

Joe,
I think those mounts are part of the oil cooler assy from the factory. They
are installed to the cooler with some type of brads and are not removable as
I recall??

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of jskmberki@windstream.net
Sent: Saturday, October 12, 2013 8:17 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] 2nd gen oil cooler mount

Does anyone know where one could get the rubber mounts for the RX 7 2nd gen
oil cooler? They have embedded studs and provide some isolation, Thanks
for any help.

Joe Berki

LimoEZ