I'd start by dividing the current scale factor of FF channel by 3.75 , plug that value in there and see if it looks right. I'll try it on the bench when I get a chance.
Tracy
Sent from my iPad
Tracy,
Prop is a prince P tip, 70” dia by 90” pitch. Any suggestions
as to what numbers I can alter to convert US gal. to litres? Somehow I
have to get the readings up 3.75 to get litres. Neil.
Sent: Tuesday, August 21, 2012 10:17 PM
Subject: [FlyRotary] Re: Prop revs
ONLY? 6300 is at the HIGH end of normal static. I would
be more concerned about over Reving at top speed if this were a 200+ MPH
plane. It will probably be about right for the glastar
though.
Be happy, celebrate! BTW, what are the numbers on that
prop? L x P?
Tracy
Sent from my iPad
All,
Looks like I am finally connected
after many attempts.. I have a P ported renesis in a glastar that is
ready to fly. Tuning the motor yesterday to find that I cannot get the
motor revs over 6300. I suspected the prop (prince fixed) is too big,
but am assured that that is normal as a static load. Lonnie suggests
that once moving the extra revs will appear. How do I tune the motor for
the top end revs? Any advice?
Neil.
|