Received-SPF: pass
 receiver=logan.com; client-ip=209.85.213.52; envelope-from=rwstracy@gmail.com
Subject: Re: [FlyRotary] PSRU oil return line
References: <list-5726416@logan.com>
From: Tracy <rwstracy@gmail.com>
Content-Type: text/plain;
	charset=us-ascii
In-Reply-To: <list-5726416@logan.com>
Message-Id: <FF7BEB3E-B74B-4FF3-85CF-030D70C31054@gmail.com>
Date: Thu, 23 Aug 2012 21:30:52 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (1.0)

Drilling & taping a hole in the foot of the rear(as in the car) rotor housin=
g is my favorite spot.   But the return ports are both 1/4" NPT, not 1/8" NP=
T on one of them.  =20

Tracy

Sent from my iPad

On Aug 23, 2012, at 7:58 PM, <jskmberki@windstream.net> wrote:

> Where on a 2nd gen engine is the best place for a oil return line from the=
 PSRU drain?   Can I use Al tubing between the 1/4" port and the 1/8" port i=
nto a T?
>=20
> Thanks for any help
>=20
> Joe Berki=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List=
.html