I am using one of Dale's blocks on my Renesis and it works fine with never a
hint of a leak.  Excellent workmanship!

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Dale_R
Sent: Friday, August 19, 2011 12:54 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Fwd: oil premix data; info request

Hi All,

    FWIW, I still make versions of this block for '92 and earlier FD and
FC series, and for the Renesis

    The attached image only shows one of the 1/8" NPTF "clean oil"
outlets.  I normally supply it with three, which can also be used for
temp or pressure sensors.  Also I now recess the bolt holes and include
SS socket screws.

    Yes, I know, I need some new photos.

Dale_R
COZY MkIV #0497
Ch's. 13, 16, 18, 22 & 23 in-progress
http://members.cox.net/rogersda/Products.htm

On 8/19/2011 8:38 AM, Ernest Christley wrote:
>
> One of these remote mounts bolted to the firewall solves a lot of
> problems.  Just cover the filter block mount point with a chunk of
> aluminum and pipe oil from the remote mount into the port at the
> bottom of the engine below the port.  I have an extra adapter to
> convert that port to AN if you want it, but you'll need two.  I think
> it was Mazda Trix that sells them.
>
>> On Fri, Aug 19, 2011 at 9:17 AM, Charlie England
>> <ceengland@bellsouth.net <mailto:ceengland@bellsouth.net>> wrote:
>>
>> ...
>>     BTW, anyone know of an adapter block for remote-ing the oil filter
>>     on a Renesis? None of the ones I've found list the Renesis.
>>
>>     Charlie

--
Dale_R
Cozy MKIV #497