That would work using the stock AT 93+/Cosmo/20B bellhousing too. What I was planning on doing more or less…how did Buly do his stock AT bellhousing supports?
Marc
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Al Gietzen
Sent: Friday, May 13, 2011 8:11 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] FW: [FlyRotary] RD1C
Has anyone built their motor mount where the rear of the motor is supported
via the bellhousing bolt locations
Joe;
I’ve done that for my 20B. I have a 3/8” aluminum plate that mounts between the rear iron the lower offset blocks for Tracy’s redrive. I milled 3/8” off the blocks. Don’t have good photos, but maybe you can get the idea from those attached. I’ve also moved the starter from the bottom to the left side.
Al