To The Rotary Group,
Yes I know I am a troublemaker (too much computer time available with my day job) and some of you are probably sick of all my posts !!.............."But" with that being said one of our group is seriously considering the development of a "Mistral" type
back-plate to allow the use of a standard "Lycoming" "Dynafocal type 1" engine mount ring that will be a virtual "Bolt-on" to the
93-95 13BREW , Cosmo 13B & 20B and the Renesis 13B Rotarys.............Several builders and potentials have indicated they
would be interested in such a back-plate (including me)............I have one of the few "Mistral" back-plates that ended up in the
hands of experimenters (waited 2 years for it)..........It is severely over engineered for our use (and overpriced) and has many
features we do not need...........
If you have followed "Back-plate" string of posts recently you know that Jarrett Johnson one our group with aspirations to
install a Cosmo 20B in his project started the discussion first about an developing an intake manifold for 13B & 20B Rotarys
(which needs to be done also) then I jumped in and said that a common engine mount design might also be needed and if
you have been reading the posts lately a lot of info has been kicked around about the various Rotarys and what it will take to "Marry" the "Mistral" back-plate with a "RX8 "Renesis" water-pump (with the magic of digital scanning & CAD) to design
such a back-plate.........
Those that have been on the Rotary forum for several years may remember Jarrett posting his trials and tribulations in
building a huge CAM mill (at home).............He is a commercial designer with the talent and equipment (including foundry)
to pull this off............I have offered my "Mistral" back-plate to be scanned (He trying to find someone here in Okla to do
the job) and I also have a "Renesis" front cover to scan............What we really need now is a 93-95 13BREW front side
housing (unusable condition preferred as long as front side is undamaged) to put in his hands as this is what the back-plate
will bolt to..............If someone in the group has an unusable 93-95 13BREW front side housing they will donate I will pay
to have it shipped to Jarrett..............You may contact me off the forum if you would prefer..........I have no horse in this race
I would just like to see such a product be made available to the group..........
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tue, May 3, 2011 11:45:09 PM
Subject: [FlyRotary] Re: Back-plate
Jarrett,
Will be a good idea to scan both the Mistral and Renesis housings.............You really need
a 93-95 13BREW (preferably) or Cosmo 20B front housing to scan.............Most of my 13B
engines are 86-91.............My Cosmo 13B is adaptable but lacks some of the machined bolt
and stud pads of the 13BREW, Renesis or Cosmo 20B front side housing which you need
to make allowances for on the redesigned back-plate if you want it to fit all three versions of
these engines..................Throw this out to the group and see if someone has a 1993-95
13BREW front side hsg (need not be usable) they would donate or lend to the project.........
You really need this front side housing in front of you......... Even with all the scans nothing
beats having the actual hardware............IMHO
Best Regards,
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: H & J Johnson <hjjohnson@sasktel.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tue, May 3, 2011 10:43:03 PM
Subject: [FlyRotary] Re: Back-plate
Evening Kelly, so just thought I'd send a note w/ an update. I did find a fella in Tulsa who has access to a laser scanner. He's getting me some pricing
on what it would cost to get the job done. I'm thinking it might be a good idea to get both the Mistral housing as well as a Renisis Front Cover scanned?
I'd like to get an Iron [preferably the side that mates to the front cover] scanned as well but don't know if you've got one handy [as in, not 'in' an engine]. I could always
do it here in time but that might take a bit before I get my hands on one that is not in an engine.