Jeff,
The engine, psru, EM-2, EC-2, both exchangers, water tanks, coils, injectors, fuel rails, two EFI fuel pumps, alternator, starter and prop together cost me about $11,000. You can probably add at least another $1000 or two for hoses, clamps, exhaust, etc. All the additional (extra) stuff I have, that I listed on the first email (including the cowl and engine mount) add up to about $5500 (that is from looking at ebay, mazda beat, etc for pricing.)
If you want the engine package, psru, EM-2, EC-2, both exchangers, water tanks, coils, injectors, fuel rails, two EFI fuel pumps, alternator, starter, prop and wiring harness how does $8000 sound? If you go $9000, I’ll throw in everything, about $18,000 worth of stuff.
It runs great! I have worked out all the system issues except for the cooling. The second radiator is the same size core that Tracy has on his RV-8, and it is cooling his three rotor, so I know it will work, I just ran out of time.
I have a couple of pictures, but can easily snap more of something specific.
Give me a call if you want, and we can discuss more:
Cell: 910-824-1717
Home: 910-822-7445
Cheers,
Chris
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Jeff Luckey
Sent: Friday, March 18, 2011 12:08 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: For Sale
Chris,
What are you asking?
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Chris and Terria
Sent: Saturday, March 05, 2011 05:22
To: Rotary motors in aircraft
Subject: [FlyRotary] For Sale
Gents,
The Air Force is sending me to Korea for at least two years. I just don’t have the time anymore to put into building and installing the engine. Therefore, regrettably, I must sell it.
I have a Renesis rebuild by Bruce Turrentine, EM-2, EC-2, RD-1C, Catto prop, wiring harness, RV-8 engine mount, James cowl, oil cooler, and water cooler. I would like to sell it all together, but will part it out if needed.
It all runs great, I just needed to finish figuring out the cooling.
I also have a bunch of extra parts:
Renesis Front plate
Renesis mid plate
2 rotors w/ all seals
1 eccentric shaft
Water pump
Thermostat housing
Counterweight
Tension bolts
Oil pump
Metering oil pump drive gear
Oil pump drive gear
Oil pump chain
Balance weight (front)
Front stationary gear, plate, needle bearings and thrust plate
Rear stationary gear
Pressure regulator
Oil injector lines and bolts
Complete air intake (upper, lower, throttle body)
Set of coils
Metering pump
Primary fuel rail
Set of four injectors
Other oil lines
Wiring harness
Oil filter tree
Timing gear
Fuel rail spacer
Secondary fuel rail
Eccentric pulley
H2O sensor
Knock sensor
Anyone out there looking for an almost complete package?
Chris