Mailing List flyrotary@lancaironline.net Message #5402
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] fuel lines
Date: Wed, 21 Jan 2004 13:09:05 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
On 1/21/04 12:44 PM, "Scott Stout" <squiggles@yahoo.com> wrote:

> For a 13b NA,
>
> What size fuel lines are commonly used for forward of the fuel pumps?
> And prior to the fuel pumps?
>
> Also prior to firewall forward,  is there anyone who is successfully
> using Nylo-seal or similar nylon 11 or 12 tubing as fuel lines?  I ask
> this as my kit came with big fat rubber fuel lines, however with having
> to route 4 fuel lines into each wing their size(1/2" OD) presents some
> challenges.
>
> Thanx...
> -Scott
>
>

Scott, I just realized you may have a tractor airplane. I used the aluminum
tubing in the low pressure areas between the fuel tanks up to the fuel
filter.

--
Bulent Aliev
Stretched CZ MK-IV W/Turbo Rotary
Ft Lauderdale, FL FXE
http://home.bellsouth.net/p/PWP-MyPlane



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster