Mailing List flyrotary@lancaironline.net Message #5399
From: Mark Steitle <msteitle@mail.utexas.edu>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: Re: [FlyRotary] Re: Coolant plumbing
Date: Wed, 21 Jan 2004 08:51:39 -0500
To: <flyrotary@lancaironline.net>
If I do go ahead at a later date and install a turbo on my 20B I will be in the same boat as you,
except I will need 3 additional injectors instead of 2.

Good luck,
Mark

At 02:45 AM 1/21/2004 -0500, you wrote:
I'm turbo-charging and using Paul Lamar's runners, so I need 4 of the same
injectors to fit the single fuel rail..
I'm following a set of injectors on Ebay and hope they don't get too pricey?
Bulent

On 1/20/04 5:19 PM, "Mark Steitle" <msteitle@mail.utexas.edu> wrote:

> Bulent,
> Are you turbo-charging or going N/A?  I followed Ed Anderson's lead (460cc
> injectors) and downsized the injectors in order to get an acceptable
> idle.  I bought a new set of eight 43# injectors off ebay for about
> $210.  So, that gives me six new injectors, with two spares.  I kept my old
> injectors for if/when I add a turbo.
>
> Mark S.
>
> At 02:58 PM 1/20/2004 -0500, you wrote:
>> Thanks Mark. I ordered the level sensor. Are you using the injectors that
>> came with the engine? I need 2 of the main injectors of 20B to replace the
>> secondary ones.
>> Bulent
>>
>>



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster