Mailing List flyrotary@lancaironline.net Message #53090
From: Kelly Troyer <keltro@att.net>
Subject: re: Renesis front/pump hsg
Date: Mon, 29 Nov 2010 06:37:41 -0800 (PST)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>

Thanks Mark,
      I will have to do a weight comparison between the 13B and Renesis hsgs
for an accurate weight loss number...............Glad to hear you made it to see
Chris's project............As I sit here at my computer with project parts stacked
here and there waiting to be installed it is the interaction between all the guys
(and Girrls) of the group that keeps me from going "Batty" from my caretaking
job until I can get time away to make meaningful progress on my project !!.....
 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo




From: Mark Steitle <msteitle@gmail.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Mon, November 29, 2010 7:21:39 AM
Subject: [FlyRotary] Re: Renesis front/pump hsg

Kelly,
 
Keep in mind that my baseline for my weight-loss was the stock 20B water pump which comes in at around 13#.  The 13B pump & housing is smaller and lighter. 
 
Mark

On Mon, Nov 29, 2010 at 3:15 AM, Kelly Troyer <keltro@att.net> wrote:

 Girrls and Group,
 
    Found their E bay store for the Renesis RX8 front cover........Ordered one for my other
project (Cassutt/13B)...........It is a bargan at $75.00 including shipping.........The new price
is $240.00 + shipping from "Mazdatrix"............They had 2 left after my order so if anyone
else of the Rotary group is interested in loseing a few pounds FWFD (I think Mark said he
lost 5 lbs) go to "E bay" and type in item #  350416121987...........
 
Thanks,
 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo




From: "CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To: keltro@att.net
Sent: Sun, November 28, 2010 9:18:23 PM
Subject: Re: Renesis front/pump hsg

Dear Kelly,
Found the housing on ebay, guy in TX at Rotary Innovations.com I think it was. $75 for cover.
Thanks for the diagram, Chrissi
 
In a message dated 11/28/2010 3:09:32 A.M. Central Standard Time, keltro@att.net writes:
Girrrl's
      Great............May I ask who you purchased the hsg from and price ??..............Do you know
if they have others for sale ??
 
      The 93-95 and Renesis CAS sensors are not the same............Also if you are using Tracys
EC2 you only need one sensor............The EC2 is setup for the Renesis CAS timing wheel and
the 93-95 sensor is susposed to work with it...............I had to adapt a Renesis hub and timing
wheel to fit the "Mistral" pulley............See EC2/Renesis CAS Schematic and photo attached...
 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo




From: "CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To: keltro@att.net
Sent: Sat, November 27, 2010 1:39:25 PM
Subject: Re: Renesis front/pump hsg

Hi Kelly,
 
Found a housing on ebay, got it, cut and machined it, looking good!
Waiting for WP cartridge from NAPA, primary fuel rail from ebay.
 
Need 93-95 CAS sensor mtg plate, also can you ask list if 93-95 CAS sensor(2) are the same as Renesis CAS sensor(1)? If so then we only need to find a single additional sensor and the mtg plate. Also the 93-95 CAS timing wheel.
 
Thanks, Chrissi & Randi
 
In a message dated 11/27/2010 1:07:22 P.M. Central Standard Time, keltro@att.net writes:
Girrl's,
 
   Any luck finding a hsg ??.............
 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster