Girrrl's,
Still working out my turbo water plumbing.............But planned to plumb into the water pump
housing (pressure side into engine) to the turbo and from the turbo to the pump hsg outlet to
the radiator............. I did read in "Turbonetics" installation instructions that you should plumb
cool water into the low port and the hot (return) water to the high port of the turbo.......I do not
recall this question being asked before so I am posting this to the group that are currently or
planning to turbo their projects............Guys jump in here !!
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: "CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To: keltro@att.net
Sent: Sat, November 27, 2010 1:43:52 PM
Subject: Re: Renesis front/pump hsg
Kelly,
We're looking at cooling the turbo, from the schematics it appears as if they are feeding the turbo HOT water (high pressure is all after the pump) and returning it to the pump inlet, in effect recirculating hot water in a loop that is not seeing the radiator except in the mix?
How did you do your TO4?
...Chrissi & Randi
In a message dated 11/27/2010 1:07:22 P.M. Central Standard Time, keltro@att.net writes:
Girrl's,
Any luck finding a hsg ??.............
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo