Chrissi,
I have a complete 93 twin turbo motor intact sitting in my garage.
Let me know if you are interested. Still has all the accessories. I
bought it for my Cozy when I found Bulent Aliev's Cosmo rotary ready
to bolt up to my Cozy. Let me know and I will make you a deal.
I am in Houston, TX. Maybe we can work out a trade for some parts
for my Cozy.
David Moyer
Cell: 281-795-2712
On 11/21/2010 2:06 PM, Kelly Troyer wrote:
Chrissi,
More info.................Mark bandsawed the
Renesis waterpump housing from the
front housing as it is one casting on the
Renesis..............
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From:
Kelly Troyer <keltro@att.net>
To:
Rotary motors in aircraft
<flyrotary@lancaironline.net>
Sent:
Sun, November 21, 2010 1:40:05 PM
Subject:
[FlyRotary] Re: Fwd: rx parts
Chrissi,
Before you part with any money please be
advised that the 93-95 water pump is reverse rotation
from all previous Rotary pumps..........The 93-95
pump is driven by the flat side of a ribbed
belt........
If might be advantageous to use the 89-91 pump
and housing (normally V belt but pulleys for ribbed
belt can be adapted or purchased)............If the
weight of the cast iron 89-91 pump is a problem one
of our "FlyRotary" guys Mark Steitle (Lancair ES, P
port ,na 20B) has adapted the "Renesis" RX8
pump to his engine and uses a flat ribbed belt to
drive it ( See Attached photo)...........FWIW
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Back plate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From:
"CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To:
keltro@att.net
Sent:
Sun, November 21, 2010 12:59:56 PM
Subject:
Re: [FlyRotary] Re: Fwd: rx parts
Thanks for the input, we'll give them a call
Monday!
...Chrissi
In a message dated 11/21/2010 12:22:15 P.M.
Central Standard Time, keltro@att.net writes:
Girrls,
I suggest Brian Galloway in
Torrance , Calif (310-901-4805) as a
source recommended by Greg
Ward...........I
called Brian on Saturday morning and
had the part I needed on the way by UPS
that afternoon............
Kelly Troyer
"DYKE DELTA JD2"
(Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From:
Bill Bradburry
<bbradburry@bellsouth.net>
To:
Rotary motors in aircraft
<flyrotary@lancaironline.net>
Sent:
Fri, November 19, 2010 8:38:26 PM
Subject:
[FlyRotary] Re: Fwd: rx parts
Marcs
Import Salvage in Sanford , Fl
has about 150 Mazda cars in
his wrecking yard.
407-322-8961
or 407-314-0597
Bill
B
From: Rotary
motors in aircraft
[mailto:flyrotary@lancaironline.net]
On Behalf Of Bob
Tilley
Sent:
Friday, November 19, 2010
8:28 PM
To:
Rotary motors in aircraft
Subject:
[FlyRotary] Fwd: rx parts
Can
anyone help out the Cozy
girrls?
Cozy
III N49JB
Begin forwarded message:
ugh, I
am tired of fighting
with Randi on this one.
We need basically
everything for the front
of a motor from the
front iron on out to the
pully for a 93-95 mazda.
Except the alternator.
Randi won't go to a
dealer. Finally this
morning she went to a
junk yard and they had
one 3rd gen w/o a motor
after an hours drive, so
of course its my fault
for not going out to
"all my resources on the
net".
Where
do we begin to look or
who do we talk to. We
are not on any of the
lists, obviously not
lamars. Tracy has no 3rd
gen parts, Bruce does
not either. We have
been having this same
argument for the last
four years, hence no
progress on the engine.
Any
ideas would be
appreciated.
| David Moyer |
|
| Address |
5723 Spring Lodge Dr.
Kingwood
Texas
77345
USA
|
|
|
|---|
| E-mail | |
|---|
| Full Name | |
|---|
| Organization | |
|---|
| Telephone | |
|---|
| Job Title | |
|---|
| Web Site | |
|---|
| X-MOZILLA-HTML | |
|---|
|
|