Yeah, I must agree. I supported the last run at the idea, but then didn't really care for the end product. I don't mean to disrespect others and their efforts, but I was thinking more along these lines, but since I don't have time for my project much less designing T shirts, I just let the idea slide. But this one I like. Large across the back, with small one on the front breast. FlyRotary underneath. I'll buy 2.
Ps. Ya gotta love it when your kid comes home from daycare and says "Bobby barfed all over today, it was so gross", Knowing that tomorrow your kids will be sick....
Todd
-----Original Message-----
From: Chris Barber <cbarber@texasattorney.net>
Reply-To: Rotary motors in aircraft <flyrotary@lancaironline.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Rotary T shirt design again.
Date: Sat, 10 Apr 2010 04:54:21 +0000
Ben,
With all due respect to George, I like this design better and would be inclined to purchase a couple. I greatly prefer the more traditional wings on the rotor.
I like black T with white graphics...or the easier, white with black graphics (gray and tan wash me out....I am a "Winter", don't cha know ;-)) FWIW
All the best,
Chris Barber
Houston, GSOT
________________________________________
From: Rotary motors in aircraft [flyrotary@lancaironline.net] on behalf of Ben Schneider [plumberben@yahoo.com]
Sent: Friday, April 09, 2010 11:45 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Rotary T shirt design again.
George,
I don't have a thing against that design. I just had this image in my mind that I had been thinking about, and had not had much time to mess with it to see if it would work, and how it would look. (my mind is funny that way, things don't always turn out the way I imagine them)
Having a few days captive in the house, I fooled around with it and this was the result. Just threw it out there for everyone to see. Please don't take offense, I meant no disrespect.
Ben
--- On Fri, 4/9/10, George Lendich <lendich@aanet.com.au> wrote:
> From: George Lendich <lendich@aanet.com.au>
> Subject: [FlyRotary] Re: Rotary T shirt design again.
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Date: Friday, April 9, 2010, 4:20 PM
> Ben,
> You didn't like our previous design?
> George ( down under)
>
> Greetings group,
>
> As I have been sick the last few days (one of the many
> perks of having three little children), I had some time to
> fool around with a t-shirt design for rotary airplane
> people. I am not a graphic arts wizard, but I think it
> turned out okay. The first is just a simple logo on a
> t-shirt, the second is a logo on front, but with a small
> logo and "flyrotary.com" on the sleeve. (it is not shown on
> the sleeve, but rather is displayed on the lower left corner
> of the shirt in the picture, it would be printed on the
> right sleeve on the shirts)
> Wondered what people thought of putting "flyrotary.com" on
> the sleeve, or it could be easily put on the front under the
> logo, or left off all together.
>
> Now the downside, this company will print just one shirt,
> as they can do it digitally, but my image is too small and
> would be pixelated if larger than 5 inches across. In order
> to solve that problem, they would have to do a silk screen
> which they do for orders of 6 or more shirts. They are not
> exactly cheep, but the more orders they get, the cheeper
> they get. She quoted me $23 per shirt with an order of 6, I
> believe that was without the sleeve printing. Probably add a
> couple of bucks if that is printed on there. Any thoughts,
> discrepancies, like it, hate it, etc... all comments
> appreciated, both positive and negative.
> One school of thought is to put "flyrotary.com" on the
> shirt to promote our group, on the other hand, I don't want
> to alienate rotary enthusiasts that may follow another list.
> Perhaps just the Rotor with wings logo, and no wording. Most
> rotary enthusiasts would pick out that rotor in a second if
> seen on the flight line. Which is one of the theories behind
> the shirt. Recognition of other like minded flyers at the
> airshows. Last year at OSH we agreed to meet up on the
> flight line, but had know way of identifying one another. I
> think leaving some people out of good discussion due to
> nonrecognition.
>
> Here are the links:
>
> http://www.customink.com/designs/nologo/16728683-3659122/hotlink
>
> http://www.customink.com/designs/flyrotary5/16728581-3659122/hotlink
>
> They offer many different shirt options, so you could
> choose your preference, I don't think they all have to be
> the same. I personally would get it in a light grey, as
> white clothes and me just don't seem to get along very
> well.
>
> Best,
>
> Ben Schneider
>
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
> -----Inline Attachment Follows-----
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|