X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.122] verified) by logan.com (CommuniGate Pro SMTP 5.3.2) with ESMTP id 4127429 for flyrotary@lancaironline.net; Tue, 16 Feb 2010 19:26:58 -0500 Received-SPF: pass receiver=logan.com; client-ip=75.180.132.122; envelope-from=eanderson@carolina.rr.com Return-Path: X-Authority-Analysis: v=1.0 c=1 a=Qye-sUdMT_cA:10 a=ayC55rCoAAAA:8 a=arxwEM4EAAAA:8 a=QdXCYpuVAAAA:8 a=7g1VtSJxAAAA:8 a=ekHE3smAAAAA:20 a=UretUmmEAAAA:8 a=Ia-xEzejAAAA:8 a=nUuTZ29dAAAA:8 a=hhMEwga9DYg2FNpyigUA:9 a=0qY8JZV7KOP0NaGdJQMA:7 a=FdvDoifSMDZMHNvQTwh95EtybqYA:4 a=1vhyWl4Y8LcA:10 a=EzXvWhQp4_cA:10 a=NB8f5HQq_0x9bNGf:21 a=1xDiQiThvmPQ7rby:21 a=SSmOFEACAAAA:8 a=JiENTS6dRDL-wVK_NnsA:7 a=XF9pv0tyHGh7CcdWLhWgtx5Ls1IA:4 a=b24hZB-BgvVZVqL2:21 a=WTbbFU_mSR6Vw9S5:21 X-Cloudmark-Score: 0 X-Originating-IP: 75.191.186.236 Received: from [75.191.186.236] ([75.191.186.236:2902] helo=computername) by cdptpa-oedge04.mail.rr.com (envelope-from ) (ecelerity 2.2.2.39 r()) with ESMTP id 1E/A7-04431-FA73B7B4; Wed, 17 Feb 2010 00:26:24 +0000 From: "Ed Anderson" Message-ID: <1E.A7.04431.FA73B7B4@cdptpa-omtalb.mail.rr.com> To: "'Rotary motors in aircraft'" Subject: DIE DEI: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo Date: Tue, 16 Feb 2010 19:30:35 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0030_01CAAF3E.82FC81E0" X-Mailer: Microsoft Office Outlook, Build 11.0.5510 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579 Thread-Index: AcqvVtdwcDVvVj+yQj2IJ52kr/R2cwAEV5lg In-Reply-To: This is a multi-part message in MIME format. ------=_NextPart_000_0030_01CAAF3E.82FC81E0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Bryan, if it makes you feel any better, the correct name for the DIE effect is Dynamic Effect Intake or (DEI) - but the other acronym (DIE) is easier to remember for some reason {:>) Ed Ed Anderson Rv-6A N494BW Rotary Powered Matthews, NC eanderson@carolina.rr.com http://www.andersonee.com http://www.dmack.net/mazda/index.html http://www.flyrotary.com/ http://members.cox.net/rogersda/rotary/configs.htm#N494BW http://www.rotaryaviation.com/Rotorhead%20Truth.htm _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bryan Winberry Sent: Tuesday, February 16, 2010 5:24 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo Yes George, I was referring to the Renesis manifold. Specifically though, I was talking about the valve that produces the D.I.E. effect. What a terrible acronym. BW _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of George Lendich Sent: Tuesday, February 16, 2010 4:28 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo Bryan, I'm hearing you, I guess you mean the Renesis manifold. Maybe someone can duplicate that in carbon fiber, in a more compact form. I know - another job for Bill Jepson. George (down under) George, It's a shame that the stock intake that does all this using a valve, can't be used in our application. Bryan _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of George Lendich Sent: Tuesday, February 16, 2010 3:54 AM To: Rotary motors in aircraft Subject: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo Bryan, I missed where the 43" came from, however from my calculations for 44mm inlet tube, my calculations came to 21.36". That's for a straight tube inlet manifold. That's interesting isn't it. George (down under) This is hard for me to visualize as well. Perhaps if you get a chance, you could snap a picture from the top. Did you get 43 in. from #1 secondary to #2 secondary? Bryan _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Bradburry Sent: Monday, February 15, 2010 11:29 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo Dennis, I just looked at your picture again.the secondary look much longer than the primaries. It may be an optical illusion??? I bet you mean 1 1/8 id?? Bill B _____ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Dennis Haverlah Sent: Monday, February 15, 2010 11:03 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: rpm vs Power was : Throttle limits was Re: N.A. Renesis to turbo All my tubes are the same length and the same diameters. I can check but I think they were 1 1/4 id. and 1 1/4 od. Bill Bradburry wrote: Dennis, Aren't your primary and secondary tubes different lengths from rotor face to rotor face? If so, what are the two lengths? Are they different diameters? Bill B _____ _____ __________ Information from ESET NOD32 Antivirus, version of virus signature database 3267 (20080714) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com ------=_NextPart_000_0030_01CAAF3E.82FC81E0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Bryan, if it makes you feel any better, the correct name for the = DIE effect is Dynamic Effect Intake or (DEI) – but the other acronym = (DIE) is easier to remember for some reason {:>)

 

Ed

 

From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bryan Winberry
Sent: Tuesday, February = 16, 2010 5:24 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = rpm vs Power was : Throttle limits was Re: N.A. Renesis to = turbo

 

Yes George, I was referring to the = Renesis manifold.  Specifically though, I was talking about the valve that produces the D.I.E. effect.  

What a terrible = acronym.

BW

From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of George Lendich
Sent: Tuesday, February = 16, 2010 4:28 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = rpm vs Power was : Throttle limits was Re: N.A. Renesis to = turbo

 

Bryan,

I'm hearing you, I guess you = mean the Renesis manifold. Maybe someone can duplicate that in carbon fiber, = in a more compact form. I know - another job for Bill = Jepson.

George (down = under)

George,

=

It’s a shame that the stock = intake that does all this using a valve, can’t be used in our = application.

Bryan

 

From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of George Lendich
Sent: Tuesday, February = 16, 2010 3:54 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = rpm vs Power was : Throttle limits was Re: N.A. Renesis to = turbo

 

Bryan,

I missed where the 43" = came from, however from my calculations for 44mm inlet tube, my calculations = came to 21.36". That's for a straight tube inlet manifold. That's = interesting isn't it.

George (down = under)

This is hard for me to visualize as = well.  Perhaps if you get a chance, you could snap a picture from the = top.

Did you get 43 in. from #1 = secondary to #2 secondary?

Bryan

 

From: Rotary motors in = aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Bradburry
Sent: Monday, February = 15, 2010 11:29 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = rpm vs Power was : Throttle limits was Re: N.A. Renesis to = turbo

 

Dennis,

I just looked at your picture again…the secondary look much longer than the primaries.  It may be an = optical illusion???  I bet you mean 1 1/8 id??

Bill B 

 

From: Rotary motors in aircraft = [mailto:flyrotary@lancaironline.net] On Behalf Of Dennis = Haverlah
Sent: Monday, February = 15, 2010 11:03 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: = rpm vs Power was : Throttle limits was Re: N.A. Renesis to = turbo

All my tubes = are the same length and the same diameters.  I can check but I think they were 1 = 1/4 id. and 1 1/4 od.

Bill Bradburry wrote:

Denn= is,

Aren’t your primary and secondary tubes different lengths from rotor face to rotor face?   If so, what = are the two lengths?  Are they different = diameters?

Bill B

 

 

 



__________ Information from ESET NOD32 Antivirus, version of virus = signature database 3267 (20080714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

------=_NextPart_000_0030_01CAAF3E.82FC81E0--