|
Rino,
I have the same mod's and see the same low oil pressure at
idle when the oil is warm. I see a around 60 psi in flight. Both of my
pressure senders are located at the oil pad block. At onetime I had one OP
sender between the engine out and oil cooler in and would see pressures as
high as 120 or more. Where's your OP sender located? Lynn indicated the
oil jet replacements are the cause of the low pressure readings. Check the
archives for November of last year.
Bobby
Tracy,
When I rebuilt my Renesis I installed the Thermal
Pellet and the E-Shaft oil Jets. The oil jets seemed to have lowered my
oil pressure at idle speed. I get only about 20 psi at 1500
rpm. Is that normal or have I done something wrong during the
installation. At higher rpm I get what looks to be normal pressure up to
90 psi.
The oil seem to warm up faster now, that is
better.
Rino
|