Mike,

The usefulness of this software tool has merit as far as I'm concerned. Just another tool to stick in the tool bag and pull it out if needed. I'd be interested in getting the software once the final version is complete. It is innovative thinking like you have demonstrated here that helps home builders get the job done.

Thanks,

George Rippeto

--- On Fri, 1/29/10, Thomas Mann <tmann@n200lz.com> wrote:

> From: Thomas Mann <tmann@n200lz.com>
> Subject: [FlyRotary] Re: Tiff to CAD Software
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Date: Friday, January 29, 2010, 2:25 PM
>
>
>
>  
>  
>
>
>
>
>
>
>
>  
>
>
>
> Mike,
>
> The graphic is not a true
> representation of the final design. It
> merely depicts an unmodified P-51 scoop that has been
> rendered in CAD, scaled
> 61% and rotated lightly in  the clockwise
> direction.
>
>   
>
> My actual radiator design has a
> frontal area of 203 sq in and a
> depth of 3.5 in.  
>
>   
>
> As stated earlier, the purpose
> of the post was to announce my
> willingness to share a software program that I had
> developed and found useful.
>
>   
>
> T Mann
>
>
>
>  
>
>
>