Mailing List flyrotary@lancaironline.net Message #49840
From: Tracy Crook <tracy@rotaryaviation.com>
Sender: <rwstracy@gmail.com>
Subject: Re: [FlyRotary] Re: Tiff to CAD Software
Date: Fri, 29 Jan 2010 15:35:08 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
And it looks like you did a pretty good job of it too Thomas.  I have a version of turboCad that will scan a drawing and generate a cad file but the result took more manual cleanup than doing it from scratch.  It's not that easy to do.

Tracy

On Fri, Jan 29, 2010 at 3:25 PM, Thomas Mann <tmann@n200lz.com> wrote:

Mike,

The graphic is not a true representation of the final design. It merely depicts an unmodified P-51 scoop that has been rendered in CAD, scaled 61% and rotated lightly in  the clockwise direction.

 

My actual radiator design has a frontal area of 203 sq in and a depth of 3.5 in.

 

As stated earlier, the purpose of the post was to announce my willingness to share a software program that I had developed and found useful.

 

T Mann


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster