Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Sat, 16 Jan 2010 11:06:43 -0700
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Pitot/Static & Transponder Cert.
Message-Id: <20100116110643.6c889e4c.bob@bob-white.com>
In-Reply-To: <list-4084996@logan.com>
References: <list-4084996@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

HI Steve,

You need that check until you are ready for IFR.  If you fly IFR,  you
need the check within the last 24 months.  You can't do that in the
phase 1 anyway. :)

Bob W.

On Sat, 16 Jan 2010 09:48:46 -0800
Steve Thomas <glasair2@me.com> wrote:

> I'm ready for a pitot/static and transponder check and I'm wondering a couple of things:
> 
> 1.  I'm in Santa Barbara, CA and my local avionics shop is not only horribly expensive, but also has little or no experience with experimentals.  Can anyone recommend an avionics shop in the Southern California area that knows how to work with us?  Anyone out there mobile?
> 
> 2.  Any advice on how to do this with the least amount of pain?
> 
> 3.  Is the certification required for the DAR?  Can I get my final inspection done before the pitot/static thing and then fly somewhere else for the certification?  
> 
> Thanks to everyone for all the help and many many posts on all subjects rotary.  I want to be in the air in February.
> 
> Best Regards,
> 
> Steve Thomas
> Glasair Super II RG
> Mistral Rotary
> _______________________________________________________
> 
> 
> 
> 
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
Now Rotary Powered  Alpine 
     http://www.youtube.com/watch?v=FwceNc2ydN8
Cables for your rotary installation - http://roblinstores.com/